E2zero® PE-Butyl Tape

Product Details

The self-adhering E2ZERO PE-Butyl Tape is a flexible, tough and tear-resistant tape for exterior use to seal overlaps of radon and vapor membranes and is also used to bond and seal membranes to concrete, masonry, wood, metal, and other surfaces (perimeter).

The butyl-based adhesive layer is covered by a PE layer.

Specifications

• Size: 4 inches x 82 feet.
• Composition: PE film sealing tape with a special cold welding PIB/butyl rubber
• adhesive. Release liner made of silicone paper.
• Temperature resistance: -22°F to 176°F
• Minimum application temperature: 14°F to 86°F, the adhesive tape must have a temperature of > 50°F.
• Shelf life: Max. 1 year in cool and dry conditions.
• Color:  Grey (PE covering), black (butyl)
• Not resistant against: Oil, many organic solvents, e.g. benzene
• Tensile strength (DIN EN 14410): Approx. 100 N / 25 mm
• Elongation at break (DIN EN 14410): Approx. 500 %
• Peel strength (IPM 5009): ≥ 10 N / 25 mm
• Tack: Extremely high

 

Further technical data available upon request.

Subject to change without notice in line with product advancements.

Application

E2ZERO PE-Butyl Tape functions solely as a sealant and should not be used as a load-bearing connector. For a permanent connection, the substrates should be firm/taut, dry, smooth, and free of dust, sawdust, silicone and grease. Do not adhere to frozen surfaces. Surfaces must be suitable for permanent bonding. If in doubt, an adhesion test is recommended to verify proper performance and durability of the bond. The greater the pressure applied, the better the performance of the tape.

Note: Always confirm compliance with local building requirements prior to installation.

­­­­­­­­­­­­­­­

WARRANTY:

Backed by a limited product warranty for product replacement from E2zero.